Sticker Cut Line Generator
The die-cut contour your plotter follows, offset in millimetres, rounded joins, Print & Cut SVG out.
Works with: Cricut Design Space · Silhouette Studio · Brother ScanNCut
Drop several files at once to convert the whole folder in one pass. Got a different format? A PNG, JPG, HEIC, PDF, SVG or DXF still comes out as Cut line.
× removes a colour and its shapes; click a swatch to change it. Every format follows.
- Runs in this tab
- No sign-up
- Full resolution out
Batch
Every file is traced on its own at its own resolution, with the settings in the panel. A file converted here comes out identical to the same file converted by itself.
Every format
Conversion settings
Trace settings
Full-colour trace for print and web.
Fine-tune
Raise it to clear dust, grain and stray dots; 0 keeps every mark.
Untick for pixel art: the outline then follows every pixel edge.
With Remove background: how close a colour must be to the background to go with it.
Machine output
Height follows the source aspect ratio.
Laser and Router follow the traced outlines. Engrave photo burns the picture itself, line by line, for photos and portraits.
Heat transfer vinyl is pressed face down, so it has to be cut mirrored. The second box is the overcut in millimetres: a drag knife starts each shape pointing the wrong way, and running past the start covers that stretch properly so the piece weeds out clean.
Beam or bit width. Left at zero the tool runs down the centre of the line, so a part finishes one tool width undersize. Set it and the path is offset by half, with holes offset the opposite way.
Holes before the part that holds them, so nothing comes loose while there is still cutting to do. Also shortens the travel between cuts.
See it on your product
Put this artwork on a 3D mug, tumbler, sign, phone case or canvas, turn it all the way round, or drop it onto a photograph of your own blank. The preview page has the product picker, the colours and the placement controls.
Open the preview and renderHow it works
Upload your design
Works from a PNG, JPG or a photo of hand-drawn art.
We close every path
A cutting machine follows an outline all the way round. Open paths will not separate, so we close them and flag any that cannot be.
Import and cut
The SVG opens directly in Design Space or Silhouette Studio.
Sticker cut line generator, free and online
A sticker cut line generator online free: drop a transparent PNG and a smooth cut line is drawn round it at the offset you set, holes welded shut for a clean die-cut. This cutline generator exports SVG for Cricut and Silhouette, DXF for plotters, and a sticker cut line generator PDF with the CutContour spot line for print shops.
It is sticker cut line generator free and a sticker cut line generator online that works like an app on a phone or tablet: no sticker cut line generator app to install.
Why it matters
Closed paths, every time
This is the difference between a cut file and a picture. An open path leaves the piece attached to the sheet.
Holes cut as holes
The counter in an "o" or an "a" comes out as a separate closed contour with opposite winding, so the machine lifts it out.
No stray specks
Sub-threshold fragments are dropped before export, so the blade does not chase dust across the mat.
Free and local
No signup and no upload. Machine files are never watermarked, because a mark in a cut file is extra cut paths.
Questions
Will this import into Design Space?
Yes. The SVG uses closed paths with an explicit fill rule, which is what Design Space needs to follow an outline all the way round.
Why does my design have extra pieces?
Every distinct region becomes its own contour. Raise the detail setting to merge small fragments, or clean the source image first.
Can I cut a photograph?
Use Mono mode and adjust the threshold. A photo becomes a single silhouette rather than a tonal image, which is what a blade can actually follow.
Reading on Cut line and machine files
PNG to Cut line: here, by hand, or on a server
| Veconvert | Illustrator, by hand | A paid vectorizer | |
|---|---|---|---|
| What it costs | Free preview; one file for $3.49 as a guest ($3.99 for technical files), $6.50 in bulk | $23 a month | $8–15 a month |
| How long it takes | Seconds | 30–60 minutes by hand | Seconds |
| Skill needed | None. Drop the file | You have to be able to draw | None |
| Where your file goes | Nowhere. It stays in this tab | Stays on your machine | Uploaded to a server |
| Cut line with real units | Yes | Yes, with setup | Usually pixels |
| Machine files too | DXF, G-code, PLT, STL from the same trace | Separate export each time | Rarely |
More converters and tools
Ready to convert your PNG?
Free, unlimited, no account, and nothing leaves this tab.
Convert a PNG now