Signature to SVG
Turn a handwritten signature into a clean transparent vector for PDFs, email footers and letterheads.
Works with: Adobe Acrobat · DocuSign · Gmail · Word · Canva
Drop several files at once to convert the whole folder in one pass. Got a different format? A PNG, JPG, HEIC, PDF, SVG or DXF still comes out as SVG.
Or sign here with a mouse, a finger or a pen
× removes a colour and its shapes; click a swatch to change it. Every format follows.
- Runs in this tab
- No sign-up
- Full resolution out
Batch
Every file is traced on its own at its own resolution, with the settings in the panel. A file converted here comes out identical to the same file converted by itself.
Every format
Conversion settings
Trace settings
Full-colour trace for print and web.
Fine-tune
Raise it to clear dust, grain and stray dots; 0 keeps every mark.
Untick for pixel art: the outline then follows every pixel edge.
With Remove background: how close a colour must be to the background to go with it.
Machine output
Height follows the source aspect ratio.
Laser and Router follow the traced outlines. Engrave photo burns the picture itself, line by line, for photos and portraits.
Heat transfer vinyl is pressed face down, so it has to be cut mirrored. The second box is the overcut in millimetres: a drag knife starts each shape pointing the wrong way, and running past the start covers that stretch properly so the piece weeds out clean.
Beam or bit width. Left at zero the tool runs down the centre of the line, so a part finishes one tool width undersize. Set it and the path is offset by half, with holes offset the opposite way.
Holes before the part that holds them, so nothing comes loose while there is still cutting to do. Also shortens the travel between cuts.
See it on your product
Put this artwork on a 3D mug, tumbler, sign, phone case or canvas, turn it all the way round, or drop it onto a photograph of your own blank. The preview page has the product picker, the colours and the placement controls.
Open the preview and renderHow it works
Upload
Preset for this kind of artwork, no settings to work out.
Check the preview
Every output format can be inspected before you download it.
Download
SVG for design, DXF and G-code for machines, EPS and PDF for print.
Draw signature online: signature to svg, create signature svg
No photo of your signature? Draw signature online right on the page: sign in the box with a mouse, a finger or a stylus (pressure is read from a pen), undo or clear as often as you like, then press "Use this signature". It is traced into the same clean, transparent signature to SVG as a scanned one, ready for PDFs, Word, Gmail and DocuSign.
Why it matters
Preset for the job
The colour count, detail and smoothing arrive tuned for this kind of artwork rather than left at a generic default.
Every format from one trace
The same geometry produces the vector, the machine file and the print file. No re-uploading between tools.
See it before you download it
Each format renders in the preview panel, including the machine formats parsed back from the file itself.
Free, local, no signup
The conversion runs in your browser, so there is no upload and no queue.
Questions
Can I draw my signature instead of uploading it?
Yes. Sign in the box under the upload area with a mouse, finger or pen, then press "Use this signature". It is converted in your browser; the drawing is never uploaded.
Do I need an account?
No. In-browser conversion is free and unlimited with no signup. Free picture downloads carry a watermark; the paid plan removes it and unlocks the machine formats, which are never watermarked.
What if the result is not good enough?
Some artwork genuinely needs a person rather than an engine. Adjust detail and colour count first; if it still will not come out, the source is usually the limit.
Can I use the output commercially?
Yes. It is your artwork, and we make no claim on what you convert.
Reading on SVG and machine files
Signature to SVG: here, by hand, or on a server
| Veconvert | Illustrator, by hand | A paid vectorizer | |
|---|---|---|---|
| What it costs | Free preview; one file for $3.49 as a guest ($3.99 for technical files), $6.50 in bulk | $23 a month | $8–15 a month |
| How long it takes | Seconds | 30–60 minutes by hand | Seconds |
| Skill needed | None. Drop the file | You have to be able to draw | None |
| Where your file goes | Nowhere. It stays in this tab | Stays on your machine | Uploaded to a server |
| SVG with real units | Yes | Yes, with setup | Usually pixels |
| Machine files too | DXF, G-code, PLT, STL from the same trace | Separate export each time | Rarely |
More converters and tools
Ready to convert your Signature?
Free, unlimited, no account, and nothing leaves this tab.
Convert a Signature now