DXF to DWG
Free online DXF to DWG converter. Convert DXF to DWG and get a DWG drawing that opens in AutoCAD, BricsCAD and DraftSight, at real scale. Reads lines, arcs, circles, polylines, text and layers, at real scale. Runs in your browser: nothing uploaded, no sign-up.
Works with: AutoCAD · Fusion 360 · LibreCAD · QCAD · DraftSight
Drop several files at once to convert the whole folder in one pass. Got a different format? A PNG, JPG, HEIC, PDF, SVG or DXF still comes out as DWG.
× removes a colour and its shapes; click a swatch to change it. Every format follows.
- Runs in this tab
- No sign-up
- Full resolution out
Batch
Every file is traced on its own at its own resolution, with the settings in the panel. A file converted here comes out identical to the same file converted by itself.
Every format
Conversion settings
Machine output
Height follows the source aspect ratio.
Laser and Router follow the traced outlines. Engrave photo burns the picture itself, line by line, for photos and portraits.
Heat transfer vinyl is pressed face down, so it has to be cut mirrored. The second box is the overcut in millimetres: a drag knife starts each shape pointing the wrong way, and running past the start covers that stretch properly so the piece weeds out clean.
Beam or bit width. Left at zero the tool runs down the centre of the line, so a part finishes one tool width undersize. Set it and the path is offset by half, with holes offset the opposite way.
Holes before the part that holds them, so nothing comes loose while there is still cutting to do. Also shortens the travel between cuts.
See it on your product
Put this artwork on a 3D mug, tumbler, sign, phone case or canvas, turn it all the way round, or drop it onto a photograph of your own blank. The preview page has the product picker, the colours and the placement controls.
Open the preview and renderHow it works
Upload the drawing
Read in the browser. Nothing is uploaded.
Check units and extents
The checker reports what the file declares before you rely on it.
Export
Units are written into the output so the next program does not have to guess.
Dxf to dwg: dxf to dwg converter, convert dxf to dwg
DXF to DWG: the drawing is written as an AutoCAD R2000 DWG, which every AutoCAD, BricsCAD and DraftSight version since 2000 opens. A DXF to DWG converter that is free and online, with layers and units kept.
Why it matters
Units survive the trip
The most common way a CAD interchange goes wrong is a file arriving with no declared units. Our DXF output always states them.
Extents reported, not assumed
The real drawing bounds are read from the geometry rather than trusted from a header that may be stale.
Entity types flagged
SPLINE, ELLIPSE, HATCH and TEXT are the entities that most often fail on import. They are reported before you find out at the machine.
Nothing uploaded
Client drawings stay on your machine, which matters when the work is under NDA.
Is DXF to DWG worth paying for?
A DWG is the file a shop actually runs. Walk through the artwork requirements a laser cutter, a CNC shop or a sign maker publishes and the same request appears: send something a machine can follow. What turns up instead is a screenshot or a logo pulled off a website at 600 pixels, and somebody redraws it by hand — twenty-five to forty minutes — or sends it to an art service at $25 to $60 a file.
The conversion here is free and unlimited and stays that way. The paid plan is what unlocks the machine formats, which are never watermarked at any tier because a mark in a cut file is extra cut paths a machine would run.
Questions
Can you read DWG?
Yes, in your browser: AutoCAD R13 to 2018 files, with the exception of the 2007 format, which is refused with a message rather than misread. Lines, arcs, circles, polylines, splines, ellipses, blocks and layers are read; text and hatch fills are counted and reported but not drawn. DWG can be written too, as AutoCAD 2000, which every current CAD program opens.
What DXF version do you write?
R2000 by default, which current CAD and CAM packages read. R12 is available for older controllers.
Will my layers survive?
Layer names and colours are kept, and layers that were off or frozen stay that way. Blocks are exploded into their shapes; attributes and paper-space layouts are not carried across.
Reading on DWG and machine files
DXF to DWG: here, by hand, or on a server
| Veconvert | Illustrator, by hand | A paid vectorizer | |
|---|---|---|---|
| What it costs | Free preview; one file for $3.49 as a guest ($3.99 for technical files), $6.50 in bulk | $23 a month | $8–15 a month |
| How long it takes | Seconds | 30–60 minutes by hand | Seconds |
| Skill needed | None. Drop the file | You have to be able to draw | None |
| Where your file goes | Nowhere. It stays in this tab | Stays on your machine | Uploaded to a server |
| DWG with real units | Yes | Yes, with setup | Usually pixels |
| Machine files too | DXF, G-code, PLT, STL from the same trace | Separate export each time | Rarely |
More converters and tools
Ready to convert your DXF?
Free, unlimited, no account, and nothing leaves this tab.
Convert a DXF now