Company Stamp to Vector: How to Get a Great Result Every Time

What a company stamp to vector is for

Turn a scanned or photographed company stamp, rubber stamp or seal into a clean vector: the paper and its shadow left out, the ink traced with its lettering kept sharp, in SVG, PDF, EPS or DXF. Free, in your browser.

Where most converters let you down

Plenty of tools will happily take your file and give you something back. The trouble is what they give you: many hand you a picture inside an SVG wrapper, or round every corner and fill in the holes in your lettering. You only find out later, when the file will not cut, print, import or open the way you expected.

What you actually want is real paths you can scale, edit and cut. That is the standard this company stamp to vector is built to.

How to use the company stamp to vector in 3 steps

Open the company stamp to vector and drop in your file.
Check the result in the preview and adjust the settings if you need to.
Download the result.

Open the company stamp to vector

Why Veconvert is the better company stamp to vector

Real geometry, never a wrapper. Open the SVG in a text editor and you will find paths, not a base64 copy of your stamp.
Two tracers, chosen for the artwork. A logo keeps its square corners and small counters; a photo is traced by an engine made for photos.
Edit before you download. Recolour any colour or remove it with its shapes, take the background off with one click, and regenerate with finer or smoother settings.
Every format from one conversion. The same trace gives you SVG, PDF, EPS, DXF and more, without uploading again.
Private. The file is converted in your browser. Nothing is uploaded, so client artwork stays on your computer.

What happens to your file

The stamp is read in your browser at its full size. Flat artwork such as logos, icons and lettering goes through this site’s own tracer, which finds where one colour meets another, keeps sharp corners sharp and smooths the curves between them. Photographs and full-colour illustrations are traced with VTracer, the open-source engine built for continuous tone, compiled to run on your own device.

The conversion runs in your browser, so the file is never uploaded: client work, statements and unreleased designs stay on your computer.

Getting the best result: mistakes to avoid

Use a crisp impression on smooth paper, or the original artwork if you have it.
Start from the biggest, cleanest stamp you have. Around 1000 pixels on the long edge is a comfortable minimum; below about 500 the trace follows the blur.
Crop away anything you do not want traced. A tight crop gives the tracer more pixels for the part that matters.
For a logo, fewer colours give cleaner shapes. For a photo, choose a photo-friendly style instead of forcing a flat trace.
Zoom into the preview before you pay: edges, small lettering and holes are where a trace shows its quality.

What it costs

Yes, converting is free: the conversion and checking the result cost nothing, and the work runs in your browser, so nothing is uploaded. The side-by-side preview on the converter pages comes with a free account. Saving the finished file is paid: $3.49 for one file ($3.99 for a technical file such as DXF, G-code, STL or embroidery) with no account needed, or included in a plan from $6.99 a month.

You see the result before you spend anything, so you only pay for a file you are happy with.

Frequently asked questions

How do I make a digital stamp from an image?

Photograph the stamp flat, without flash, fill the frame with it, and drop the photo here. Download the SVG or a transparent PNG, and place it in your document.

Will the faint or uneven parts of the impression come out?

Thin or broken ink is kept where it is darker than the paper around it. A very faint impression traces better from a scan at 600 dpi than from a phone photo.

Is it free?

Is my file uploaded?