Sign Making Converter: How to Get a Great Result Every Time

What a sign making converter is for

Sign shops get artwork in every format and need one thing: clean outlines at real size for the router, laser or plotter. The sign making converter traces lettering and logos into DXF with stated units, ready to cut letters, panels and stand-offs.

Where most converters let you down

Plenty of tools will happily take your file and give you something back. The trouble is what they give you: many write coordinates in pixels with no units, upside down, with outlines that do not close. You only find out later, when the file will not cut, print, import or open the way you expected.

What you actually want is machine geometry in real millimetres or inches, the right way up, with closed contours. That is the standard this sign making converter is built to.

How to use the sign making converter in 3 steps

Open the sign making converter and drop in your file.
Check the result in the preview and adjust the settings if you need to.
Download the result.

Open the sign making converter

Why Veconvert is the better sign making converter

Real units in the file. DXF output carries millimetres or inches, so it imports at the size you set.
The right way up. Image coordinates run downwards; machine coordinates run upwards. The conversion flips them so the part is not mirrored.
Closed contours. Outlines join up, and anything that does not is flagged before you download.
Preview the machine file itself. The download is parsed back and drawn, so what you see is what the machine will get.
Nothing uploaded. Drawings for clients stay on your machine.

What happens to your file

Your image is first traced in the browser into clean outlines. For a machine the trace is set up for cutting rather than colour: one outline where a cutter should go, with photos turned into line art instead of blotchy shapes.

The conversion runs in your browser, so the file is never uploaded: client work, statements and unreleased designs stay on your computer.

Getting the best result: mistakes to avoid

For routed letters, check the smallest inside corner against your bit radius; anything tighter is rounded by the cutter.
If you have the same picture in several formats, PNG is usually the cleanest source.
High-contrast image artwork gives the cleanest toolpaths: dark shapes on a light background.
Set the finished width in the settings before downloading, then check the size the page reports.
For a laser, decide whether each shape should be cut or engraved in your laser software; the file gives you clean outlines for either.
Run a test cut on scrap before cutting good material, as you would with any new file.

What it costs

Yes, converting is free: the conversion and checking the result cost nothing, and the work runs in your browser, so nothing is uploaded. The side-by-side preview on the converter pages comes with a free account. Saving the finished file is paid: $3.49 for one file ($3.99 for a technical file such as DXF, G-code, STL or embroidery) with no account needed, or included in a plan from $6.99 a month.

You see the result before you spend anything, so you only pay for a file you are happy with.

Frequently asked questions

How do I convert Image to DXF?

Drop your Image file on this page, check the preview, and press Download. The DXF is made in a few seconds, with no sign-up.

Is my Image file uploaded anywhere?

No. The image to dxf conversion runs in your browser, on your own device. The file never leaves it.