How to Convert ICO to EPS Free, Step by Step
Need an EPS from an ICO? Here is how to convert ICO to EPS, what usually goes wrong, and how to get a file you can use first time.
Why convert ICO to EPS?
An EPS is postScript describing a single piece of artwork, with a bounding box saying how big it is. The print industry standard for decades. Carries real physical dimensions.
- Sending artwork to a print house.
- Screen printing separations.
- Sign making.
The catch is the ICO itself. Nothing above 256px, because the directory stores each size in a single byte. That is why the conversion matters as much as the file you start with.
Where most converters let you down
Plenty of tools will happily take your ICO and give you something back. The trouble is what they give you: many hand you a picture inside an SVG wrapper, or round every corner and fill in the holes in your lettering. You only find out later, when the file will not cut, print, import or open the way you expected.
What you actually want is real paths you can scale, edit and cut. That is the standard this ICO to EPS converter is built to.
How to convert ICO to EPS in 3 steps
- Open the ICO to EPS converter and drop in your ICO.
- Check the result in the preview and adjust the settings if you need to.
- Download the EPS.
Why Veconvert is the better ICO to EPS converter
- Real geometry, never a wrapper. Open the EPS in a text editor and you will find paths, not a base64 copy of your ICO.
- Two tracers, chosen for the artwork. A logo keeps its square corners and small counters; a photo is traced by an engine made for photos.
- Edit before you download. Recolour any colour or remove it with its shapes, take the background off with one click, and regenerate with finer or smoother settings.
- Every format from one conversion. The same trace gives you SVG, PDF, EPS, DXF and more, without uploading again.
- Private. The file is converted in your browser. Nothing is uploaded, so client artwork stays on your computer.
What happens to your file
The ICO is read in your browser at its full size. Flat artwork such as logos, icons and lettering goes through this site’s own tracer, which finds where one colour meets another, keeps sharp corners sharp and smooths the curves between them. Photographs and full-colour illustrations are traced with VTracer, the open-source engine built for continuous tone, compiled to run on your own device.
The conversion runs in your browser, so the file is never uploaded: client work, statements and unreleased designs stay on your computer.
Getting the best EPS: mistakes to avoid
- An ICO holds several sizes; the largest one is used.
- Start from the biggest, cleanest ICO you have. Around 1000 pixels on the long edge is a comfortable minimum; below about 500 the trace follows the blur.
- Crop away anything you do not want traced. A tight crop gives the tracer more pixels for the part that matters.
- For a logo, fewer colours give cleaner shapes. For a photo, choose a photo-friendly style instead of forcing a flat trace.
- Zoom into the preview before you pay: edges, small lettering and holes are where a trace shows its quality.
What it costs
Yes, converting is free: the conversion and checking the result cost nothing, and the work runs in your browser, so nothing is uploaded. The side-by-side preview on the converter pages comes with a free account. Saving the finished file is paid: $3.49 for one file ($3.99 for a technical file such as DXF, G-code, STL or embroidery) with no account needed, or included in a plan from $6.99 a month.
You see the result before you spend anything, so you only pay for a file you are happy with.
Frequently asked questions
How do I convert ICO to EPS?
Drop your ICO file on this page, check the preview, and press Download. The EPS is made in a few seconds, with no sign-up.
Is my ICO file uploaded anywhere?
No. The ico to eps conversion runs in your browser, on your own device. The file never leaves it.
Will the EPS open in Illustrator, CorelDRAW and Affinity Designer?
Yes. The file is a standard EPS, written to the format’s specification, and opens in Illustrator, CorelDRAW and Affinity Designer and other software that reads EPS.
Is it free?
Yes, converting is free: the conversion and checking the result cost nothing, and the work runs in your browser, so nothing is uploaded. The side-by-side preview on the converter pages comes with a free account. Saving the finished file is paid: $3.49 for one file ($3.99 for a technical file such as DXF, G-code, STL or embroidery) with no account needed, or included in a plan from $6.99 a month.