Online Vectorizer
Drop in any image and get vectors back. Colour or single-outline, with the detail and smoothing under your control.
Works with: Illustrator · Inkscape · Figma · Canva · web browsers
Drop several files at once to convert the whole folder in one pass. Got a different format? A PNG, JPG, HEIC, PDF, SVG or DXF still comes out as SVG.
× removes a colour and its shapes; click a swatch to change it. Every format follows.
- Runs in this tab
- No sign-up
- Full resolution out
Batch
Every file is traced on its own at its own resolution, with the settings in the panel. A file converted here comes out identical to the same file converted by itself.
Every format
Conversion settings
Trace settings
Full-colour trace for print and web.
Fine-tune
Raise it to clear dust, grain and stray dots; 0 keeps every mark.
Untick for pixel art: the outline then follows every pixel edge.
With Remove background: how close a colour must be to the background to go with it.
Machine output
Height follows the source aspect ratio.
Laser and Router follow the traced outlines. Engrave photo burns the picture itself, line by line, for photos and portraits.
Heat transfer vinyl is pressed face down, so it has to be cut mirrored. The second box is the overcut in millimetres: a drag knife starts each shape pointing the wrong way, and running past the start covers that stretch properly so the piece weeds out clean.
Beam or bit width. Left at zero the tool runs down the centre of the line, so a part finishes one tool width undersize. Set it and the path is offset by half, with holes offset the opposite way.
Holes before the part that holds them, so nothing comes loose while there is still cutting to do. Also shortens the travel between cuts.
See it on your product
Put this artwork on a 3D mug, tumbler, sign, phone case or canvas, turn it all the way round, or drop it onto a photograph of your own blank. The preview page has the product picker, the colours and the placement controls.
Open the preview and renderHow it works
Upload your image
Drag in a PNG, JPG or WebP. Nothing is uploaded, the trace runs in your browser.
We rebuild the shapes
The engine finds the edges and redraws them as real curves, not a bitmap in a wrapper.
Download the SVG
Scales cleanly at any size, on a business card or the side of a van.
The online vectorizer: raster to vector in one step
Veconvert is a free online vectorizer. Drop in a picture and get clean vector paths back as SVG, EPS, PDF or DXF.
As an image vectorizer it finds every edge and redraws it as curves and sharp corners, in flat colour layers for a logo or a single outline for a cutter. That is raster to vector done properly: pixels in, real shapes out, with no bitmap hidden inside the file.
Use it as a vector maker for logos, icons, drawings, signatures and scans. Vectorize once and the result prints, cuts and engraves at any size.
To vectorize image files the way a vectorizer ai tool would, the background, colours and specks are handled automatically; every setting stays open if you want to change the detail, the smoothing or the number of colours. The result is a vector image that opens in Illustrator, Inkscape, Figma, CorelDRAW and CAD.
How to vectorize an image
- Drop in a PNG, JPG, WebP or scan.
- Choose colour, a single outline, or a centerline.
- Check the preview against the original, then download SVG, EPS, PDF or DXF.
People also search for
- vectorize image free
- convert image to vector
- vector converter
- auto trace
- image trace online
- logo vectorizer
Why it matters
Real geometry, not a wrapper
Several popular converters base64-embed your original bitmap inside an SVG tag. That file does not scale, cut or separate. Open ours and there is no <image> tag anywhere in it.
Corners stay corners
Sharp angles are detected and kept sharp, while curves between them are smoothed. A logo comes back with its corners square.
Holes stay holes
Counters in lettering and enclosed shapes trace with opposite winding, so they render and cut as holes rather than filling in.
Nothing leaves your machine
No upload, no queue, and no copy of your artwork on someone else’s server.
Questions
How big should my image be?
Around 1000 pixels on the long edge is a comfortable floor for a logo. Below roughly 500 the edges are already soft, and the trace follows that softness faithfully because it cannot know the blur was not intended.
Can I convert a photograph?
You can, and it is worth knowing what you get: thousands of tonal transitions become flat vector shapes, which reads as a posterised rendering rather than a faithful copy. For logos, line art, icons and lettering it does exactly what you expect.
Is the original file better?
Always. If the vector original exists somewhere, it beats any trace, ours included.
Reading on SVG and machine files
Image to SVG: here, by hand, or on a server
| Veconvert | Illustrator, by hand | A paid vectorizer | |
|---|---|---|---|
| What it costs | Free preview; one file for $3.49 as a guest ($3.99 for technical files), $6.50 in bulk | $23 a month | $8–15 a month |
| How long it takes | Seconds | 30–60 minutes by hand | Seconds |
| Skill needed | None. Drop the file | You have to be able to draw | None |
| Where your file goes | Nowhere. It stays in this tab | Stays on your machine | Uploaded to a server |
| SVG with real units | Yes | Yes, with setup | Usually pixels |
| Machine files too | DXF, G-code, PLT, STL from the same trace | Separate export each time | Rarely |
More converters and tools
Ready to convert your Image?
Free, unlimited, no account, and nothing leaves this tab.
Convert a Image now