Veconvert compared
Against cloud converters, AI vectorizers and Illustrator — on price, on what happens to your file, and on whether what comes out will run on a machine.
| Veconvert | Cloud converters | AI vectorizers | Illustrator | |
|---|---|---|---|---|
| Price | Free, unlimited preview one machine file for $3.99, no subscription | $7–15 a month for 25–100 files | $8–12 a month | $23 a month |
| Where the file goes | Nowhere. It is traced in this tab | Uploaded to a server | Uploaded to a server | Stays on your machine |
| Conversions | No limit, no account | Counted, and they run out | Counted | No limit |
| DXF with real units | Yes — R2000 and R2010, millimetres or inches | Rarely; usually pixels | Some, at pixel scale | Yes, with setup |
| G-code | Yes — laser and router, feed, power, cut depth | No | No | No |
| Vinyl cutter HPGL (.plt) | Yes — overcut, weed border, HTV mirroring | No | No | No |
| Kerf and cut order | Yes — tool width offset, holes cut first | No | No | Manual |
| Watermark on machine files | Never, at any tier | Often | Often | n/a |
| Formats written | 21 today, including GIF, BMP, TIFF and multi-size ICO written byte by byte | Many, some of them renamed PNGs | A handful | Many |
| TIFF in Chrome or Firefox | Yes — decoded here, because no browser decodes it | Server side | Server side | Yes |
| Tells you how close the trace is | Yes — a percentage, before you download | No | No | No |
| Batch | Yes — drop a folder, get a ZIP | Paid tiers | Paid tiers | Scripting |
| Works offline | Yes, once the page has loaded | No | No | Yes |
Competitor columns describe the category as it is commonly sold, not any one company on any one day. The individual pages below go into each of them properly, including what they do better.
Where the difference actually shows
The trace is the easy half
Every converter produces some kind of outline. What decides whether the job runs is what carries: a DXF with millimetres in its header, a G-code file with your feed rate and cut depth, a PLT with the overcut a drag knife needs and the mirror for heat transfer vinyl. Convert somewhere else and you do that part by hand.
Nothing is uploaded, so NDA artwork is fine
The trace, every export and the render run in this tab. Open the network panel and convert something: no request carries your file. A cloud converter cannot make that claim, and for a shop under a customer NDA it is the whole decision.
The formats are real, not renamed
A browser canvas will not refuse a format it cannot write: ask it for a GIF and it hands back a PNG with the wrong name on it. GIF, BMP, TIFF and multi-size ICO are written here byte by byte, and a test captures every download and decides what it is from its first bytes rather than its extension.
You see how close it got before you pay
The result carries a number: how much of the original the trace covers, or for a photograph how close it is tonally. A counter that filled in or a hairline that dropped out is invisible at preview size and obvious in the percentage.
Machine files are never watermarked
Not on any tier. A watermark in a DXF is extra cut paths and somebody will run it: a laser burning SAMPLE through a customer sheet, a router cutting it into plywood. They are held back on the free tier instead and arrive clean.
Where something else is the better choice
A comparison that finds no reason to use anything else is an advertisement. These are real, and each page below says so in more detail.
A hard photograph
A paid engine with a model on a server has more compute than a browser tab and will sometimes pull a cleaner trace out of a soft-edged photo. If that is the job and the file is not confidential, use one.
Formats we do not read yet
PSD, camera RAW and DWG are not read here yet. The registry marks them as planned and the pages say so rather than failing after you have uploaded something.
Drawing from scratch
This converts what you already have. Illustrator and Inkscape are for making it in the first place, and nothing here replaces that.
Compared one by one
Questions
What is the best free PNG to SVG converter?
The honest answer is that it depends on what you do next. For a logo that has to end up on a cutter, a laser or a CNC, this one: the trace is free and unlimited, and the DXF and G-code carry real millimetres rather than pixels. For a difficult photograph, a paid engine running on a server will sometimes beat it.
Is Veconvert really free?
Conversion is free and unlimited with no account, and nothing is uploaded. Pictures downloaded on the free tier carry a watermark. Machine files — DXF, G-code, PLT, STL — are never watermarked, because a mark in a cut file is extra cut paths and somebody would run it; they are sold instead - $3.99 for one, no sign-up - and arrive clean.
Do my files get uploaded anywhere?
No. The trace, every export and the mockup all run in your browser. You can prove it: open the network tab, convert a file, and watch for a request carrying it. There is not one. That is also why artwork under NDA is safe here and is not safe on a cloud converter.
Which is better, Veconvert or an AI vectorizer?
A server-side engine has more compute and, on a photograph with soft edges, often traces better. What it does not do is hand you a DXF at the right size, a G-code file with your feed rate in it, or a PLT with the overcut your drag knife needs. If the file is going to a machine, the trace is the easy half.
Can I convert PNG to DXF for a laser cutter for free?
The conversion is free and unlimited. The DXF download is $3.99 as a guest, because that is the file a shop is actually paying for and it cannot be watermarked safely.
How many converters are there?
568 working routes today, out of 568 pages. The ones that are not built say so on their own page rather than failing after you have uploaded something.
Does it work on a phone?
Yes. Every tool is laid out for a phone and the tap targets are 44px, which is checked by a test rather than eyeballed.