JPG to SVG
Free online JPG to SVG converter. Convert JPG to SVG and get clean vector paths that scale to any size, for Cricut, Silhouette, laser cutters, print and the web. Runs in your browser: nothing uploaded, no sign-up.
Works with: Illustrator · Inkscape · Figma · Canva · web browsers
Drop several files at once to convert the whole folder in one pass. Got a different format? A PNG, JPG, HEIC, PDF, SVG or DXF still comes out as SVG.
× removes a colour and its shapes; click a swatch to change it. Every format follows.
- Runs in this tab
- No sign-up
- Full resolution out
Batch
Every file is traced on its own at its own resolution, with the settings in the panel. A file converted here comes out identical to the same file converted by itself.
Every format
Conversion settings
Trace settings
Full-colour trace for print and web.
Fine-tune
Raise it to clear dust, grain and stray dots; 0 keeps every mark.
Untick for pixel art: the outline then follows every pixel edge.
With Remove background: how close a colour must be to the background to go with it.
Machine output
Height follows the source aspect ratio.
Laser and Router follow the traced outlines. Engrave photo burns the picture itself, line by line, for photos and portraits.
Heat transfer vinyl is pressed face down, so it has to be cut mirrored. The second box is the overcut in millimetres: a drag knife starts each shape pointing the wrong way, and running past the start covers that stretch properly so the piece weeds out clean.
Beam or bit width. Left at zero the tool runs down the centre of the line, so a part finishes one tool width undersize. Set it and the path is offset by half, with holes offset the opposite way.
Holes before the part that holds them, so nothing comes loose while there is still cutting to do. Also shortens the travel between cuts.
See it on your product
Put this artwork on a 3D mug, tumbler, sign, phone case or canvas, turn it all the way round, or drop it onto a photograph of your own blank. The preview page has the product picker, the colours and the placement controls.
Open the preview and renderHow it works
Upload your image
Drag in a PNG, JPG or WebP. Nothing is uploaded, the trace runs in your browser.
We rebuild the shapes
The engine finds the edges and redraws them as real curves, not a bitmap in a wrapper.
Download the SVG
Scales cleanly at any size, on a business card or the side of a van.
JPEG to SVG converter: a JPG to SVG converter online, free
JPEG to SVG is harder than PNG to SVG: a JPEG has no transparency and carries compression speckle around every edge. This jpeg to svg converter reads through that speckle, merges the near-identical shades JPEG invents, and traces clean shapes instead of hundreds of noisy fragments.
It is a jpg to svg converter online free to use: open the page, drop the JPG, download the SVG. As a jpg to svg converter online it runs entirely in your browser, so a photo of a client’s logo or a scan of a signature never leaves your computer.
A white or flat background can be dropped automatically, so the SVG you get is the design and not a white rectangle behind it.
Selling on Etsy, Shopify or Merch by Amazon? Print-on-demand needs artwork that stays sharp at 4500 px and beyond: a trace into vector paths does, a stretched PNG does not. Flat colours stay flat, edges stay crisp, and there is no oil-painting smear for a print shop to reject.
JPG to SVG for Cricut and Silhouette
Use the outline mode, which gives one clean cut path per shape. There is a JPG to SVG for Cricut page with it preset.
Photo JPG to SVG
A photograph becomes a layered colour vector, which suits posters and stylised art. For a line drawing of a photo, try photo to line art.
How to convert JPG to SVG
- Drop in the .jpg or .jpeg file.
- Choose colour layers or a single outline.
- Download the SVG.
People also search for
- jpg to svg for cricut
- jpeg to vector
- jpg to svg high quality
- convert jpeg to svg free
- jpg to svg inkscape
- image to svg
Why it matters
Real geometry, not a wrapper
Several popular converters base64-embed your original bitmap inside an SVG tag. That file does not scale, cut or separate. Open ours and there is no <image> tag anywhere in it.
Corners stay corners
Sharp angles are detected and kept sharp, while curves between them are smoothed. A logo comes back with its corners square.
Holes stay holes
Counters in lettering and enclosed shapes trace with opposite winding, so they render and cut as holes rather than filling in.
Nothing leaves your machine
No upload, no queue, and no copy of your artwork on someone else’s server.
Questions
Why does a JPG to SVG photo look like an oil painting elsewhere?
Because the photo is traced at its own size, so every colour patch is a few pixels across and reads as a brush dab when the SVG is shown. A small photo (up to 600 px) is traced here at twice its size (nearest neighbour, nothing blurred) and scaled back: measured on four photos, the match with the original (SSIM) rose from 0.80 to 0.92 and the fine detail kept from 70% to 90%.
Why is my JPG to SVG result noisy around the edges?
JPEG compression leaves faint blocks and halos. Raise the smoothing setting or lower the colour count and the speckle merges into the shape it belongs to.
Can I convert JPEG to SVG without a white background?
Yes. A flat background is detected and left out, so the SVG is transparent around the design.
Is the JPG uploaded anywhere?
No. The trace runs in your browser tab.
How big should my image be?
Around 1000 pixels on the long edge is a comfortable floor for a logo. Below roughly 500 the edges are already soft, and the trace follows that softness faithfully because it cannot know the blur was not intended.
Can I convert a photograph?
You can, and it is worth knowing what you get: thousands of tonal transitions become flat vector shapes, which reads as a posterised rendering rather than a faithful copy. For logos, line art, icons and lettering it does exactly what you expect.
Is the original file better?
Always. If the vector original exists somewhere, it beats any trace, ours included.
Reading on SVG and machine files
JPG to SVG: here, by hand, or on a server
| Veconvert | Illustrator, by hand | A paid vectorizer | |
|---|---|---|---|
| What it costs | Free preview; one file for $3.49 as a guest ($3.99 for technical files), $6.50 in bulk | $23 a month | $8–15 a month |
| How long it takes | Seconds | 30–60 minutes by hand | Seconds |
| Skill needed | None. Drop the file | You have to be able to draw | None |
| Where your file goes | Nowhere. It stays in this tab | Stays on your machine | Uploaded to a server |
| SVG with real units | Yes | Yes, with setup | Usually pixels |
| Machine files too | DXF, G-code, PLT, STL from the same trace | Separate export each time | Rarely |
More converters and tools
Ready to convert your JPG?
Free, unlimited, no account, and nothing leaves this tab.
Convert a JPG now