Sticker to SVG
Free online Sticker to SVG converter. Convert Sticker to SVG and get clean vector paths that scale to any size, for Cricut, Silhouette, laser cutters, print and the web. Runs in your browser: nothing uploaded, no sign-up.
Works with: Cricut Design Space · Silhouette Studio · Brother ScanNCut
Drop several files at once to convert the whole folder in one pass. Got a different format? A PNG, JPG, HEIC, PDF, SVG or DXF still comes out as SVG.
× removes a colour and its shapes; click a swatch to change it. Every format follows.
- Runs in this tab
- No sign-up
- Full resolution out
Batch
Every file is traced on its own at its own resolution, with the settings in the panel. A file converted here comes out identical to the same file converted by itself.
Every format
Conversion settings
Trace settings
Full-colour trace for print and web.
Fine-tune
Raise it to clear dust, grain and stray dots; 0 keeps every mark.
Untick for pixel art: the outline then follows every pixel edge.
With Remove background: how close a colour must be to the background to go with it.
Machine output
Height follows the source aspect ratio.
Laser and Router follow the traced outlines. Engrave photo burns the picture itself, line by line, for photos and portraits.
Heat transfer vinyl is pressed face down, so it has to be cut mirrored. The second box is the overcut in millimetres: a drag knife starts each shape pointing the wrong way, and running past the start covers that stretch properly so the piece weeds out clean.
Beam or bit width. Left at zero the tool runs down the centre of the line, so a part finishes one tool width undersize. Set it and the path is offset by half, with holes offset the opposite way.
Holes before the part that holds them, so nothing comes loose while there is still cutting to do. Also shortens the travel between cuts.
See it on your product
Put this artwork on a 3D mug, tumbler, sign, phone case or canvas, turn it all the way round, or drop it onto a photograph of your own blank. The preview page has the product picker, the colours and the placement controls.
Open the preview and renderHow it works
Upload your design
Works from a PNG, JPG or a photo of hand-drawn art.
We close every path
A cutting machine follows an outline all the way round. Open paths will not separate, so we close them and flag any that cannot be.
Import and cut
The SVG opens directly in Design Space or Silhouette Studio.
Sticker to SVG converter: free and online
Convert sticker to SVG in your browser: drop in a Sticker file and download the SVG. The file is converted on your own device and never uploaded, so this sticker to svg converter is safe for private and confidential files.
SVG is the vector format of the web and of cutting machines: shapes and curves that stay sharp at any size.
The design is traced into clean, closed shapes a cutting machine can follow, with specks too small to cut left out.
Other conversions to SVG: PNG to SVG, JPG to SVG, JPEG to SVG, WEBP to SVG, GIF to SVG, BMP to SVG.
People also search for
- sticker to svg free
- sticker to svg without losing quality
Why it matters
Closed paths, every time
This is the difference between a cut file and a picture. An open path leaves the piece attached to the sheet.
Holes cut as holes
The counter in an "o" or an "a" comes out as a separate closed contour with opposite winding, so the machine lifts it out.
No stray specks
Sub-threshold fragments are dropped before export, so the blade does not chase dust across the mat.
Free and local
No signup and no upload. Machine files are never watermarked, because a mark in a cut file is extra cut paths.
Questions
How do I convert Sticker to SVG?
Drop your Sticker file on this page, check the preview, and press Download. The SVG is made in a few seconds, with no sign-up.
Is my Sticker file uploaded anywhere?
No. The sticker to svg conversion runs in your browser, on your own device. The file never leaves it.
Will this import into Design Space?
Yes. The SVG uses closed paths with an explicit fill rule, which is what Design Space needs to follow an outline all the way round.
Why does my design have extra pieces?
Every distinct region becomes its own contour. Raise the detail setting to merge small fragments, or clean the source image first.
Can I cut a photograph?
Use Mono mode and adjust the threshold. A photo becomes a single silhouette rather than a tonal image, which is what a blade can actually follow.
Reading on SVG and machine files
Sticker to SVG: here, by hand, or on a server
| Veconvert | Illustrator, by hand | A paid vectorizer | |
|---|---|---|---|
| What it costs | Free preview; one file for $3.49 as a guest ($3.99 for technical files), $6.50 in bulk | $23 a month | $8–15 a month |
| How long it takes | Seconds | 30–60 minutes by hand | Seconds |
| Skill needed | None. Drop the file | You have to be able to draw | None |
| Where your file goes | Nowhere. It stays in this tab | Stays on your machine | Uploaded to a server |
| SVG with real units | Yes | Yes, with setup | Usually pixels |
| Machine files too | DXF, G-code, PLT, STL from the same trace | Separate export each time | Rarely |
More converters and tools
Ready to convert your Sticker?
Free, unlimited, no account, and nothing leaves this tab.
Convert a Sticker now