SVG to PLT
HPGL for Roland, Graphtec, Summa, USCutter and any cutter that speaks it. Written at exactly 40 plotter units to the millimetre, with an overcut so shapes weed out clean.
Works with: Roland CAMM-1 · Graphtec CE · Summa · USCutter · SignCut · Flexi
Drop several files at once to convert the whole folder in one pass. Got a different format? A PNG, JPG, HEIC, PDF, SVG or DXF still comes out as PLT.
Or paste SVG code
× removes a colour and its shapes; click a swatch to change it. Every format follows.
- Runs in this tab
- No sign-up
- Full resolution out
Batch
Every file is traced on its own at its own resolution, with the settings in the panel. A file converted here comes out identical to the same file converted by itself.
Every format
Conversion settings
Machine output
Height follows the source aspect ratio.
Laser and Router follow the traced outlines. Engrave photo burns the picture itself, line by line, for photos and portraits.
Heat transfer vinyl is pressed face down, so it has to be cut mirrored. The second box is the overcut in millimetres: a drag knife starts each shape pointing the wrong way, and running past the start covers that stretch properly so the piece weeds out clean.
Beam or bit width. Left at zero the tool runs down the centre of the line, so a part finishes one tool width undersize. Set it and the path is offset by half, with holes offset the opposite way.
Holes before the part that holds them, so nothing comes loose while there is still cutting to do. Also shortens the travel between cuts.
See it on your product
Put this artwork on a 3D mug, tumbler, sign, phone case or canvas, turn it all the way round, or drop it onto a photograph of your own blank. The preview page has the product picker, the colours and the placement controls.
Open the preview and renderHow it works
Upload your artwork
Mono mode is preset, a single cut outline is what a machine wants, not colour layers.
Set your real size
Choose millimetres or inches and the finished width. The file carries physical units, not pixels.
Check the preview, then cut
Inspect the toolpath before you download. Cuts draw solid, rapids dashed.
SVG to PLT: HPGL for vinyl cutters and plotters
SVG to PLT writes HPGL, the language Roland, Graphtec, Summa, USCutter and most sign-shop vinyl cutters speak. This svg to plt converter writes at exactly 40 plotter units per millimetre, so the cut is the size of the design, and adds an overcut so weeded shapes lift clean.
To convert svg to plt, drop the SVG in, set the width and overcut, and download. It is also an svg to hpgl converter: PLT and HPGL are the same thing.
People also search for
- svg to plt for vinyl cutter
- plt converter
- hpgl converter
- dxf to plt
Why it matters
Correct units, stated in the file
DXF exports write $INSUNITS. Without it a part imports at 25.4x the intended size, which is the single most common cause of a ruined first cut.
Y axis the right way up
SVG puts +Y down the screen; CAD and CAM put it up. We flip it. Exporting without that correction gives a part mirrored about the X axis, it cuts, but backwards.
Closed contours
A cutter following an open outline leaves the part attached. Outlines are closed, and anything that is not is flagged before you download.
Conservative G-code
The tool is disengaged before every reposition, retracted before every rapid, and the program always ends tool-off and clear.
Is SVG to PLT worth paying for?
A PLT is the file a shop actually runs. Walk through the artwork requirements a laser cutter, a CNC shop or a sign maker publishes and the same request appears: send something a machine can follow. What turns up instead is a screenshot or a logo pulled off a website at 600 pixels, and somebody redraws it by hand — twenty-five to forty minutes — or sends it to an art service at $25 to $60 a file.
The conversion here is free and unlimited and stays that way. The paid plan is what unlocks the machine formats, which are never watermarked at any tier because a mark in a cut file is extra cut paths a machine would run.
Questions
What is a PLT file?
A plt file is HPGL, Hewlett-Packard Graphics Language: pen-up and pen-down moves in plotter units. Vinyl cutters, pen plotters and some CAD printers read it.
Why does my cutter draw random travel lines?
Either the file puts the knife down between shapes (a missing PU pen-up before a move), or the cutter is set to the wrong HPGL dialect. Files from here always lift before travelling. If you still see lines, set the cutter to HPGL rather than HP-GL/2 or GP-GL.
Why is my PLT cut the wrong size?
It was written at the wrong units per millimetre. HPGL is 40 units per mm; this converter never changes that.
How does SVG to PLT compare with other converters?
Checked against vpype, an open-source plotter tool, on the same artwork: the same paths and points, the size exact to the source (74.08 mm where vpype's HP 7475A profile gave 74.45), and each plotter point written once, which made the file 29% smaller than writing every point.
What units does the file use?
Whichever you pick, millimetres or inches, and the choice is written into the file header so the receiving software does not have to guess.
Will this work with my laser?
DXF is written as R2000 by default, which LightBurn, Fusion, AutoCAD and current CAM packages all read. There is an R12 option for older controllers that predate LWPOLYLINE.
Can I trust the G-code?
Preview the toolpath first, and dry-run any new program above the material. The generated code assumes you have set your own work origin, and it homes nothing.
Reading on PLT and machine files
SVG to PLT: here, by hand, or on a server
| Veconvert | Illustrator, by hand | A paid vectorizer | |
|---|---|---|---|
| What it costs | Free preview; one file for $3.49 as a guest ($3.99 for technical files), $6.50 in bulk | $23 a month | $8–15 a month |
| How long it takes | Seconds | 30–60 minutes by hand | Seconds |
| Skill needed | None. Drop the file | You have to be able to draw | None |
| Where your file goes | Nowhere. It stays in this tab | Stays on your machine | Uploaded to a server |
| PLT with real units | Yes | Yes, with setup | Usually pixels |
| Machine files too | DXF, G-code, PLT, STL from the same trace | Separate export each time | Rarely |
More converters and tools
Ready to convert your SVG?
Free, unlimited, no account, and nothing leaves this tab.
Convert a SVG now